ubiquity_unify
no way to compare when less than two revisions
Unterschiede
Hier werden die Unterschiede zwischen zwei Versionen angezeigt.
— | ubiquity_unify [2020/03/13 08:48] (aktuell) – angelegt matthias | ||
---|---|---|---|
Zeile 1: | Zeile 1: | ||
+ | ====== Ubiquity Unify ====== | ||
+ | Routing Traffic Out of WAN2 Based on the Source Network | ||
+ | < | ||
+ | configure | ||
+ | set protocols static table 5 route 0.0.0.0/0 next-hop 200.64.2.1 | ||
+ | set firewall modify LOAD_BALANCE rule 2500 action modify | ||
+ | set firewall modify LOAD_BALANCE rule 2500 modify table 5 | ||
+ | set firewall modify LOAD_BALANCE rule 2500 source address 192.168.1.0/ | ||
+ | set firewall modify LOAD_BALANCE rule 2500 protocol all | ||
+ | commit;exit | ||
+ | </ | ||
+ | Routing Traffic Out of the VPN Interface (vti) Based on the Source | ||
+ | < | ||
+ | configure | ||
+ | set firewall modify VPN_Gateway rule 2502 action modify | ||
+ | set firewall modify VPN_Gateway rule 2502 modify table 5 | ||
+ | set firewall modify VPN_Gateway rule 2502 source address 192.168.2.0/ | ||
+ | set firewall modify VPN_Gateway rule 2502 protocol all | ||
+ | set protocols static table 5 interface-route 0.0.0.0/0 next-hop-interface vti0 | ||
+ | set interfaces ethernet eth1 vif 2 firewall in modify VPN_Gateway | ||
+ | commit;exit | ||
+ | </ | ||
+ | Routing Traffic Out of WAN2 Primarily, and WAN1 on Failover Based on the Source | ||
+ | < | ||
+ | configure | ||
+ | set load-balance group wan2_failover interface eth3 | ||
+ | set load-balance group wan2_failover interface eth2 failover-only | ||
+ | set firewall modify LOAD_BALANCE rule 2000 action modify | ||
+ | set firewall modify LOAD_BALANCE rule 2000 modify lb-group wan2_failover | ||
+ | set firewall modify LOAD_BALANCE rule 2000 source address 192.168.1.0/ | ||
+ | commit;exit | ||
+ | </ | ||
+ | Excluding Certain Traffic From Load-Balancing | ||
+ | < | ||
+ | configure | ||
+ | set firewall modify LOAD_BALANCE rule 2450 action accept | ||
+ | set firewall modify LOAD_BALANCE rule 2450 source address 192.168.2.0/ | ||
+ | set firewall modify LOAD_BALANCE rule 2450 destination address 192.168.1.0/ | ||
+ | </ | ||
+ | [[https:// | ||
+ | |||
ubiquity_unify.txt · Zuletzt geändert: 2020/03/13 08:48 von matthias